Description
Complete Screen Assembly for Huawei Honor 7X -Black
Need a good quality lcd screen and touch screen digitizer assembly for Huawei Honor 7X
This is a complete ready-to-install screen assembly for Huawei Honor 7X, Though more costly than replacing one damaged component in the screen assembly, replacement of the entire screen assembly is more simpler task and can be completed in minutes. And the screen assembly includes LCD screen + touch screen (digitizer).
- Type IPS LCD capacitive touchscreen, 16M colors
- Size 5.93 inches, 90.7 cm2 (~77.0% screen-to-body ratio)
- Resolution 1080 x 2160 pixels, 18:9 ratio (~407 ppi density)
- Multitouch Yes
- Protection Corning Gorilla Glass (unspecified version)
- - EMUI 5.1
Often Corrects the Following Problems:
- Cracked,Scratched,or Shattered Glass
- Unresponsive to touch
- "Bleeding" or slashed screen
- Dead Pixels
Compatible with:
Huawei Honor 7X
How to tell which Screen part you need for the Huawei Honor 7X:
- LCD Only: If the image under the glass is broken and the touch panel is NOT then you only need an LCD.
- Touch Panel aka Digitizer: If the top touch panel or aka glass top is cracked or broken but the image under it is fine then you only need the Touch Panel.
- Complete Screen with Touch Panel and LCD: If the top touch panel is broken and the lcd image is either black liquid or cracked you need a complete screen.
Warranty Information
1 Review
-
Huawei Honor 7X Screen Black
The screen works perfectly since installed for over a month. Time will tell on reliability. Compared to other smartphone repair costs replacing your own cracked screen for about $20.00 is a fantastic deal. Check YouTube for disassembly videos. For disassembly stick the parts and screws on a sticky tape surface in a pattern that matches the way they were positioned on the phone. When you reassemble it you know where everything goes. I used very sticky duct tape, sticky side up, stapled to cardboard. Also don't remove the screen shield until finished with the job. Get the T-8000 glue. It seals well. The tube head works well for careful control of the glue. Even better, mistakes and messes with T-8000 don't matter. After it drys it rubs right off with your fingers. You can pull parts apart, rub off the old glue after it's dry, reapply, and do it again.