CUBOT Rainbow 2 Touch Screen Digitizer -White

CUBOT Rainbow 2 Touch Screen Digitizer -White

Need a good quality touch screen for CUBOT Rainbow 2

This is the replacement front glass panel and Digitizer for the CUBOT Rainbow 2 (LCD NOT Includede). This part is responsible for all touch functionality of the CUBOT Rainbow 2. If you recently dropped your CUBOT Rainbow 2, this is the glass/digitizer combo you need to replace it with. Beware of glass without the digitizer attached as the two must be replaced simultaneously.

Note: It is not easy to repair touch panel, It is a professional job, and special repairing tools are required for assembling or disassembling the screen. So we suggest that replacing the item should be done by a experienced person. If not, we suggest you order complete screen assembly. 

Often Corrects the Following Problems:

• Cracked,Scratched,Broken or shattered Glass
• Unresponsive to touch

Compatible with:

CUBOT Rainbow 2

How to tell which Screen part you need for CUBOT Rainbow 2:

• LCD Only:If the image under the glass is broken and the touch pancel is NOT then you only need an LCD.
• Touch Panel aka Digitizer:If the top touch panel or aka glass top is cracked or broken but the image under it is fine,then you only need the Touch Panel.
• Complete Screen with Touch Panel and LCD:If the top touch panel is broken and the lcd image is either black liquid or cracked you need a complete screen.